MSC-3210N ΡΥΘΜΙΣΤΗΣ ΦΟΡΤΙΣΗΣ EPSOLAR / EPEVER EPEVER
30A MSC3210N EPEVER MPPT Charge Controller
.MPPT tracking efficiency up to 99.5%
.Maximum charging transfer efficiency up to 98.6%, full load efficiency up to 96.6 %
.Optional charging prior mode and load prior mode
.Support the lead-acid and lithium batteries
.Support no-battery mode, PV array powers load directly
.Constant voltage output of two-way load
.Freely set output voltage level
.Configurable cut-off voltage value, ensuring power supply for main load
.RS485 com. port to realize remote control
Overview :
MSC-N series is a new generation of the solar controller with a two-way load output. The two-way load output voltage can be switched to 12V or 24V DC freely by an enable switch. According to the battery voltage, the two-way load output voltage can be turned off in stages to ensure the load1 output. The two-way load output adopts a high-efficiency buck-boost conversion circuit, which greatly reduces the invalid loss of the battery and improves the service time of the battery. The MPPT charging technology can fast track the max power point of solar panels in any situation and obtain the maximum energy in real-time. It can increase the utilization ratio of solar energy by 20%-30% compared with the PWM charging method. Charging current limit, charging power limit, and high temperature charging power automatic reduction of function, fully ensure the system stability of access to excess PV modules and high temperature running. Adaptive three-stage charging mode and comprehensive electronic protections such as over-charge, over-discharge, PV & battery reverse polarity, etc. effectively ensure the power supply safer, more stable, and more durable. MSC-N series controllers are most suitable for applications in the field of security monitoring, RV, and household system, etc.
Features :
High quality and low failure rate components of ST or IR to ensure the service life
Advanced MPPT technology & ultra-fast tracking speed guarantee tracking efficiency up to 99.5%
Maximum DC/DC transfer efficiency up to 98.6%, full load efficiency up to 96.6 %
Accurate recognizing and tracking technology of multi-peaks maximum power point
Wider MPP running voltage to increase the utilization ratio of PV modules
Support the lead-acid and lithium batteries, programmable temperature compensation
High temperature charging automatic power reduction function
The freely set voltage level of the two-way load output, especially suitable for voltage-sensitive loads
Configurable cut-off voltage value for the two-way load output
Support no-battery mode, PV array powers the load directly
High-efficiency buck-boost control chip and power device, conversion efficiency up to 98.9%
Optional charging prior mode and load prior mode
Effectively prolong the running time of load one by the discontinuous power supply in load prior mode
Customized the load two output according to the actual requirement
Common negative design, used in a negative grounded system
Real-time monitor controller by an external remote meter, BT module, Wifi module or PC software
Comprehensive electronic protections